Users Forum

ADONIS Category => Documentation => Topic started by: aldus69 on March 25, 2021, 05:38:32 pm

Title: jkn and jks meaning and use
Post by: aldus69 on March 25, 2021, 05:38:32 pm
PLease, if sbdy can explain the meaning and use of these parameter, because in the Reference it is not clear
Thanks and regards
Title: Re: jkn and jks meaning and use
Post by: Roozbeh on March 25, 2021, 05:54:37 pm
Hi, JKs and JKs are the interface normal and shear stiffness which can be measured by lab tests. The formulation of interface element in ADONIS is very similar to the one explained in the FLAC program. Please take a look at the link below for more detail:

http://web.mst.edu/~norbert/ge5471/Assignments/Assign%201%20-%20FLAC%20I/FLAC%20manual/FLAC%20manual/f2d415.pdf
Title: Re: jkn and jks meaning and use
Post by: aldus69 on March 25, 2021, 05:59:08 pm
Thankyou very much