Users Forum

ADONIS Category => ADONIS Users => Topic started by: KrzysztofT on April 07, 2025, 11:24:34 pm

Title: Problem with displaying / calculating stresses
Post by: KrzysztofT on April 07, 2025, 11:24:34 pm

I have a problem with the display and calculations showing up on the ?plot? of npressures.
For very simple ?box? models without any additional loads etc.
Displacements / deformations are ok.
Unfortunately, there is both an error in the display of the stresses (even the coloured boxes go outside the model area). The values shown on the scale are constant (wrong), although assigned different colours.
I have checked on different computers.
I also have version 2.72.2 of Adonis and there everything is fine, both in terms of stresses and strains. Unfortunately, I do not have a newer version than 2.72.2, only the latest 3.90.9.
Hence my request. Would it be possible to check this and could I get an intermediate version, e.g. 3.5 or 3.75, to check and use.

Title: Re: Problem with displaying / calculating stresses
Post by: Roozbeh on April 08, 2025, 09:32:32 am

Hi, Please upload the script file so I can reproduce the issue.