x

ADONIS:
Version 3.90.11 (Released at 07/28/2025)
- A new capability has been implemented to ensure moment continuity between two separate beam elements that share the same structural node

HYRCAN:
Version 3.0.2 (Released at 07/27/2025)
- Bug in adding user defined surface using center and radius is fixed.


displacements initialization(Read 19121 times)
displacements initialization on: November 26, 2021, 01:44:36 am
Dear Roozbeh

Congratulation for your helpful and performing software.
My request is to be able to initialize displacements field after initial state applying, if it possible.
A subsequent question is about the command (script and/or keypad) to stop and restart manually, during calculation if exists.
CJ



Re: displacements initialization Reply #1 on: November 26, 2021, 01:55:47 am
Hi CJ,

1-yes you will be able to initialize the displacement from menu select Initial-> Apply Insitu -> Node Displacement
2- there is no pause/restart command in the scripting language.

-Roozbeh




Re: displacements initialization Reply #2 on: November 26, 2021, 09:58:08 am
Thanks for your quickly answer to my quite stupid question!